Xslicer SMX-1010/1020

Xslicer SMX-1010/1020 là một hệ thống tia X phát xạ dọc được trang bị máy phát tia X vi tiêu điểm 90 kV và một máy dò tấm phẳng có độ phân giải cao.
Ngoài những cải tiến về khả năng hoạt động, tốc độ di chuyển giai đoạn và tốc độ thu nhận máy dò cũng đã tăng lên, rút ngắn đáng kể thời gian kiểm tra. Quá trình kiểm tra hiện đã hiệu quả hơn. Quy trình làm việc cũng đã được đơn giản hóa cho đơn vị CT (tùy chọn có sẵn) và khả năng hoạt động đã được cải thiện.
Xslicer SMX-1010/1020 là một hệ thống tia X phát xạ dọc được trang bị máy phát tia X vi tiêu điểm 90 kV và một máy dò tấm phẳng có độ phân giải cao.
Ngoài những cải tiến về khả năng hoạt động, tốc độ di chuyển giai đoạn và tốc độ thu nhận máy dò cũng đã tăng lên, rút ngắn đáng kể thời gian kiểm tra. Quá trình kiểm tra hiện đã hiệu quả hơn. Quy trình làm việc cũng đã được đơn giản hóa cho đơn vị CT (tùy chọn có sẵn) và khả năng hoạt động đã được cải thi

The Xslicer SMX-1010/1020 is a vertical emission X-ray system equipped with 90 kV microfocus X-ray generator and a high-resolution flat panel detector. 

In addition to operability improvements, the stage movement speed and detector acquisition speed have also increased, significantly shortening inspection times. The inspection process is now more efficient. The workflow has also been simplified for the CT unit (optionally available), and operability has been improved. 

With the Xslicer SMX-1010/1020, everything from X-ray fluoroscopic inspections of surface-mounted circuit boards, sensors, and harnesses to 3D defect analysis using CT can be accomplished with a single unit.

Contact

High Image Quality Exceeding the Level of General-Purpose Models

- Equipped with ultra-high-resolution 3-megapixel flat panel detector

- New HDR Processing Function
 

Software Significantly Shortens Inspection Times

- Inspections Start in 3 Steps and 5 Seconds
 

Simple Operation

- Simple UI and Easy Positioning Operations

- Faster Detector Acquisition and Stage Movements

- Example of Continuous Inspections Using the Step Feed Function

- Inspections with the Xslicer SMX-1020 Take Half the Time of the Xslicer SMX-1010

 

Diverse Functions Provide 3D Analysis with a Single Unit

- Simple CT Function with High Image Quality (Optionally Available)

- Automated Calibration (Shorten the time for process before imaging by 80 %)

- Panoramic Imaging Function

Imaging Mode
Pixels
300 × 350 mm
Scanning time for entire range
Simple Equivalent to 2K (full HD) in size
~ 2 million pixels
SMX-1010 : 115 sec / SMX-1020 : 100 sec
Normal
Equivalent to 4K in size ~ 8 million pixels
SMX-1010 : 135 sec* / SMX-1020 : 120 sec
Fine Equivalent to 8K in size
~ 32 million pixels
SMX-1010 : 590 sec / SMX-1020 : 495 sec
TOP