DMA EPLEXOR High Temperature
The EPLEXOR® HT line is the only instrument series on the market which is able to carry out DMA measurements with a maximum dynamic force of 500 N to 1500°C.
Two high-temperature furnaces are available: RT to 1000°C and RT to 1500°C. With a standard furnace (-160°C to 500°C) simultaneously mounted, it is possible to perform consecutive test runs in both the low- and high-temperature range. EPLEXOR® HT instruments can thus cover the entire temperature span from -160°C to 1500°C.
The electronics within the system automatically identify which furnace is currently in use.
Two high-temperature furnaces are available: RT to 1000°C and RT to 1500°C. With a standard furnace (-160°C to 500°C) simultaneously mounted, it is possible to perform consecutive test runs in both the low- and high-temperature range. EPLEXOR® HT instruments can thus cover the entire temperature span from -160°C to 1500°C.
The electronics within the system automatically identify which furnace is currently in use.
For more information, please visit:
Specifications
Specifications
| Temperature range | -160°C to 1500°C; the full temperature range can be covered if the instrument is equipped with the low-temperature and one high-temperature furnace |
| Frequency range | 0.01 to 100 Hz; optional: 0.0001 Hz; 200 Hz |
| Static force range | max. 1500 N |
| Dynamic force range | from ± 25 N up to ± 500 N (depending on instrument type, see table) |
| Force sensor | interchangeable; nominal forces available from 10 N to 500 N (depending on the instrument type and configuration) |
| Static displacement | max. 60 mm (for compensating of high static forces and for extending the operation range) |
| Dynamic amplitude | from ± 1.5 mm up to ± 6 mm (depending on the instrument type and system configuration) |
| Measurement modes for applications above 500°C | asymmetric and 3/4-point bending, compression |
| Work space of the high-temperature furnaces | cylindrical chamber, diameter: 70 mm, height: 120 mm |