MDR ELASTOGRAPH/S
The MDR ELASTOGRAPH is a Moving Die Rheometer which is used to determine the viscoelastic material behavior in plastified state during vulcanization and after vulcanization of the material sample according to the highest ISO and ASTM standards.
The instrument can be equipped with five different test chambers as well as different amplitudes. The GÖTTFERT Moving Die Rheometer is attractive for the characterization of rubber compounds in plastic states, during vulcanization as well as vulcanized samples.
The instrument can be equipped with five different test chambers as well as different amplitudes. The GÖTTFERT Moving Die Rheometer is attractive for the characterization of rubber compounds in plastic states, during vulcanization as well as vulcanized samples.
For more information, please visit:
Specifications
Specifications
- Measurements with 50min-1 (0.833 Hz) / 100min-1 (1.66 Hz) selectable
- Two frequencies by fix or variable strain rates
- Different test chamber design for all kind of materials (shore, liquid, biconical open, closed)
- Extremely fast temperature control and a homogeneous temperature distribution in the reaction die
- Torque recording
- Build-in Ethernet interface for data transfer to a PC
- Deformation Amplitude : Standard +/- 0.5° (optionally selectable one additional angle between +/- 0.1° up to +/- 1°) – MDR Elastograph
- Direct drive system with variable deformation amplitude :from +/- 0.1° up to +/- 10°. Strain rate : from 1.4% – 55.8% – MDR Elastograph – S